SMART CHOICE SC-dt16H CNC MILLING 3 AXIS MACHINE

working space (X-Axis x Y-Axis) : 850mm x 410mm

Working Surface Configuration : 3 x T-Slot Size 14mm Pitch 125mm

Max load bearing of worktable : 300kg

Travel : X axis : 700mm

Travel : Y axis : 500mm

Travel : Z axis : 330mm

Distance from table surface to spindle gage plane : 350mm - 650mm

Spindle : Spindle hole taper : BT30

Spindle speed range (rpm) : 100 - 10000

Spindle drive motor : 11.0Kw (1 minute rating) / 3.7Kw (Continuous rating)

Spindle Gauge (Call number) *1:7/24

Taper No : 30 (with air blow)

Accuracy : Bidirectional accuracy of positioning of an axis : 0.006mm to 0,020mm

Accuracy : Bidirectional repeatability of an axis : Less than 0.004mm

Tool holder standard : BT30

Feed : Rabid traverse X/Y/Z axis : 48/48/48 m/min

Max feed speed : 1 mm/min to 30000 mm/min

Tool Turret : Tool magazine capacity : 14 tools (D14LiB Plus)

Type of tooling / Type of pull stud bolt : JIS B 6339-2 NO 30

Maximum tool length : 250mm

Tool changing time : (cut to cut) : 1.4 s

Maximum tool diameter : OD 80mm

Power source : Power Supply : 220V AC to 220V AC,- 15% to + 10%,3 Phase,50Hz

Compressed air supply : 0.35 Mpa to 0.55 Mpa (0.5 MPa is recommend)

Gage pressure standard/High-torque : 8Kva *6

Machine size : Machine height : 2436mm (when high column 200mm is specified)

Floor space : 2165 mm x 2040 mm

Mass of machine : 2100Kg

Control unit : Fanuc series 31i-B Plus latest version program

Input device : PMCIA,Embedded Ethernet,USB,Support program transfer tool

Included one set air dryer for 5 hp air compressor

Included one set air compressor 5hp with coupling and hose